Tree/Customization guide

From Code Synthesis Wiki

< TreeRevision as of 15:38, 1 October 2008; view current revision
←Older revision | Newer revision→
Jump to: navigation, search

Contents

Introduction

XSD provides you with mechanisms to customize the generated type system in the C++/Tree mapping. Common customization examples include:

  • using a different type for one of the XML Schema built-in types (e.g., boost::gregorian::date from the Boost libraries for xsd:date)
  • adding a member function or a data member to a generated type (e.g., add the print() function)
  • adding virtual functions to the base type of a hierarchy and implementing them in the derived types (e.g., when using xsi:type-based dynamic typing and/or substitution groups)

XSD provided two command-line options, --custom-type and --custom-type-regex, that allow you to specify which types should be customized and how these types will be customized. The format for the --custom-type option is as follows:

--custom-type name[=type[/base]]

The name component specifies the name of a type as defined in the schema being compiled. The name is unqualified since the target namespace of the schema is always assumed. The optional type component is the name of a C++ type that should be used instead of the generated type. If type is empty or not specified then the type name from the schema (i.e., name) is assumed. Finally, if the optional base component is provided then the standard mapping for the type is still generated but with this name. A few examples should make all this clear. Suppose we have the following schema:

<schema xmlns="http://www.w3.org/2001/XMLSchema" 
        targetNamespace="http://www.example.com/hello">

  <complexType name="names">
    <sequence>
      <element name="name" type="string"/>
    </sequence>
  </complexType>

</schema>

Compiling this schema without specifying any options will result in the following C++ code:

namespace hello
{
  class names
  {
    ...
  };
}

Now if we compile the above schema with the following option:

--custom-type names

The generated code would look like this:

namespace hello
{
  class names;
}

The compiler simply generated a forward declaration for names expecting us to provide the implementation. Let's say we want to use the defined elsewhere my_names class instead. Then we could use the following option:

--custom-type names=my_names

The generated code would look like this:

namespace hello
{
  typedef my_names names;
}

What if we wanted to use class template names which is defined in namespace templates? Then we could use the following option:

--custom-type names=::templates::names<char>

The resulting code would look like this:

namespace hello
{
  typedef ::templates::names<char> names;
}

Now what if all we want to do is add a simple function to the names type? It would be too much work if we had to implement all the code that gets generated ourselves. Fortunately we don't have to. We can ask the compiler to generate the standard mapping with a different name and then inherit our custom type from it:

--custom-type names=/names_base

This would result in the following C++ code:

namespace hello
{
  class names_base;
  class names;

  class names_base
  {
    ...
  };
}

Later, in our implementation of the names class, we can use names_base as a base. Here is another example:

--custom-type names=::templates::names<names_base>/names_base

This results in the following C++ code being generated:

namespace hello
{
  class names_base;
  typedef ::templates::names<names_base> names;

  class names_base
  {
    ...
  };
}

While this example may seem a bit far-fetched this technique is actually used in some special cases as will be shown later.

The --custom-type-regex option is similar to --custom-type except it allows you to use Perl-like regular expressions to match several type names at once. For more information on this option refer to the XSD command line interface documentation (man pages).

Customizing the generated type — the simple case

Let's now look at a complete set of steps necessary to do a simple customization. All code in this section is taken from the contacts example which can be found in the examples/cxx/tree/custom/ directory of the XSD distribution. Our schema looks like this:

<!-- contacts.xsd -->
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:cts="http://www.codesynthesis.com/contacts"
            targetNamespace="http://www.codesynthesis.com/contacts">

  <xsd:complexType name="contact">
    <xsd:sequence>
      <xsd:element name="name" type="xsd:string"/>
      <xsd:element name="email" type="xsd:string"/>
      <xsd:element name="phone" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:complexType name="catalog">
    <xsd:sequence>
      <xsd:element name="contact" type="cts:contact" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="catalog" type="cts:catalog"/>

</xsd:schema>

We would like to add the print() function to the contact type. The first step is to compile our schema. We will use the following XSD options (explained below):

--custom-type contact=/contact_base 
--hxx-epilogue '#include "contacts-custom.hxx"'

The first option tells XSD that we are providing our own implemntation for the contact type as well instructs it to generate the standard mapping with contact_base as a name. We will use the generated contact_base class as a base for our implementation of contact. The second option instructs the compiler to add #include "contacts-custom.hxx" at the end of the generated header file. The contacts-custom.hxx file is where we define our contact class:

// contacts-custom.hxx

#include <iosfwd> // std::ostream

namespace contacts
{
  class contact: public contact_base
  {
    // The following constructor signatures are copied from
    // contact_base except for the copy constructor and the
    // _clone function where we had to change the type from
    // contact_base to contact.
    //
  public:
    contact (const name_type&,
             const email_type&,
             const phone_type&);

    contact (const xercesc::DOMElement&,
             xml_schema::flags = 0,
             xml_schema::container* = 0);

    contact (const contact&,
             xml_schema::flags = 0,
             xml_schema::container* = 0);

    virtual contact*
    _clone (xml_schema::flags = 0,
            xml_schema::container* = 0) const;

    // Our customizations.
    //
  public:
    void
    print (std::ostream&) const;
  };
}

The implementation of the contact class is placed into the contacts-custom.cxx file:

// contacts-custom.cxx

#include <ostream>

#include "contacts.hxx"

namespace contacts
{
  contact::
  contact (const name_type& n,
           const email_type& e,
           const phone_type& p)
      : contact_base (n, e, p)
  {
  }

  contact::
  contact (const xercesc::DOMElement& e,
           xml_schema::flags f,
           xml_schema::container* c)
      : contact_base (e, f, c)
  {
  }

  contact::
  contact (const contact& x,
           xml_schema::flags f,
           xml_schema::container* c)
      : contact_base (x, f, c)
  {
  }

  contact* contact::
  _clone (xml_schema::flags f,
          xml_schema::container* c) const
  {
    return new contact (*this, f, c);
  }

  void contact::
  print (std::ostream& os) const
  {
    os << name () << " e| " << email () << " t| " << phone () << std::endl;
  }
}

There are two things worth noting about this implementation. First, note that we include contacts.hxx instead of contacts-custom.hxx. This is important since contacts-custom.hxx is not self-sufficient; for example, it refernces but does not define contact_base. Second, note that all constructors are implemented by forwarding to the corresponding contact_base constructors.

And that's pretty much it. The only piece left is the client code that uses our customizations:

// driver.cxx

#include <memory>   // std::auto_ptr
#include <iostream>

#include "contacts.hxx"

using std::cerr;
using std::endl;

int
main (int argc, char* argv[])
{
  using namespace contacts;

  std::auto_ptr<catalog> c (catalog_ (argv[1]));

  for (catalog::contact_const_iterator i (c->contact ().begin ());
       i != c->contact ().end (); ++i)
  {
    i->print (cerr);
  }
}

At this stage you may be wondering why all this works. After all the contact class is used in the generated code even though it hasn't been defined — its definition is only available at the end of the generated header file (remember the --hxx-prologue option). The reason why this works has two parts to it:

  • the compiler generates forward declaration for types that we customize
  • the C++/Tree mapping is designed in such a way that a forward declaration is sufficient for all uses of a type in a header file except for inheritance

As a result, the customization technique outlined in this section works as long as you are not customizing a type that acts as a base for some other type in the same schema file. An alternative approach that works even in the case of inheritance is described in the next section.

Customizing the generated type — the complex case

This section presents the complex case where the types being customized are inherited from in the same schema. All code in this section is taken from the taxonomy example which can be found in the examples/cxx/tree/custom/ directory of the XSD distribution. The schema for this example looks as follows:

<!-- people.xsd -->
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:ppl="http://www.codesynthesis.com/people"
            targetNamespace="http://www.codesynthesis.com/people">

  <xsd:complexType name="person">
    <xsd:sequence>
      <xsd:element name="name" type="xsd:string"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:complexType name="superman">
    <xsd:complexContent>
      <xsd:extension base="ppl:person">
        <xsd:attribute name="can-fly" type="xsd:boolean" use="required"/>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:complexType name="batman">
    <xsd:complexContent>
      <xsd:extension base="ppl:superman">
        <xsd:attribute name="wing-span" type="xsd:unsignedInt" use="required"/>
      </xsd:extension>
    </xsd:complexContent>
  </xsd:complexType>

  <xsd:complexType name="catalog">
    <xsd:sequence>
      <xsd:element name="person" type="ppl:person" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="catalog" type="ppl:catalog"/>

</xsd:schema>

We would like to add the virtual print() function to the base of the hierarchy (the person type) and override it in each derived type (superman and batman). The first step is to compile our schema. We will use the following XSD options (explained below):

--generate-polymorphic
--custom-type "person=person_impl<person_base>/person_base"
--custom-type "superman=superman_impl<superman_base>/superman_base"
--custom-type "batman=batman_impl<batman_base>/batman_base"
--generate-forward  
--fwd-prologue '#include "people-custom-fwd.hxx"'
--hxx-prologue '#include "people-custom.hxx"'

We use the --generate-polymorphic option because our instance documents will be using the xsi:type-based dynamic typing.

The set of --custom-type options should look familiar by now. They tell the compiler that we are customizing the person, superman, and batman types, that the *_impl<*_base> class template instantiations should be used instead, and that the original mapping should still be generated but renamed to *_base.

The --generate-forward option triggers generation of the people-fwd.hxx forward declaration file. The content of the people-fwd.hxx file will look along these lines:

// people-fwd.hxx - automatically generated

namespace xml_schema
{
   ... // Declarations for the XML Schema built-in types.
}

namespace people
{
  class person_base;
  typedef person_impl<person_base> person;

  class superman_base;
  typedef superman_impl<superman_base> superman;

  class batman_base;
  typedef batman_impl<batman_base> batman;

  class catalog;
}

This header file won't compile unless we supply definitions — or at least forward declarations — for the person_impl, superman_impl, and batman_impl class templates. The --fwd-prologue option does exactly that: it adds the #include "people-custom-fwd.hxx" line at the beginning of the generated people-fwd.hxx. The people-custom-fwd.hxx file provides forward declarations for the above mentioned class templates:

// people-custom-fwd.hxx

namespace people
{
  template <typename base>
  class person_impl;

  template <typename base>
  class superman_impl;

  template <typename base>
  class batman_impl;
}

Unlike the simple case, when types being customized are inherited from in the same schema file, we cannot include definitions of custom types at the end of the genearted header file. That is why we are using the --hxx-prologue option instead of --hxx-epilogue to include people-custom.hxx. Since the custom type definitions are included before the generated base types (person_base, superman_base, and batman_base) are defined we have to use class templates instead of plain classes as we did in the previous section. The content of people-custom.hxx is presented below:

// people-custom.hxx

#include <iosfwd> // std::ostream

#include "people-fwd.hxx"

namespace people
{
  //
  //
  template <typename base>
  class person_impl: public base
  {
  public:
    person_impl (const xml_schema::string& name);
    person_impl (std::auto_ptr<xml_schema::string>& name);

    person_impl (const xercesc::DOMElement&,
                 xml_schema::flags = 0,
                 xml_schema::container* = 0);

    person_impl (const person_impl&,
                 xml_schema::flags = 0,
                 xml_schema::container* = 0);

    virtual person_impl*
    _clone (xml_schema::flags = 0,
            xml_schema::container* = 0) const;
 
  public:
    virtual void
    print (std::ostream&) const;
  };

  template <typename base>
  class superman_impl: public base
  {
  public:
    superman_impl (const xml_schema::string& name, bool can_fly);
    superman_impl (std::auto_ptr<xml_schema::string>& name, bool can_fly);

    superman_impl (const xercesc::DOMElement&,
                   xml_schema::flags = 0,
                   xml_schema::container* = 0);

    superman_impl (const superman_impl&,
                   xml_schema::flags = 0,
                   xml_schema::container* = 0);

    virtual superman_impl*
    _clone (xml_schema::flags = 0,
            xml_schema::container* = 0) const;

  public:
    virtual void
    print (std::ostream&) const;
  };

  template <typename base>
  class batman_impl: public base
  {
  public:
    batman_impl (const xml_schema::string& name,
                 bool can_fly,
                 unsigned int wing_span);

    batman_impl (std::auto_ptr<xml_schema::string>& name,
                 bool can_fly,
                 unsigned int wing_span);
 
    batman_impl (const xercesc::DOMElement&,
                 xml_schema::flags = 0,
                 xml_schema::container* = 0);

    batman_impl (const batman_impl&,
                 xml_schema::flags = 0,
                 xml_schema::container* = 0);

    virtual batman_impl*
    _clone (xml_schema::flags = 0,
            xml_schema::container* = 0) const;

  public:
    virtual void
    print (std::ostream&) const;
  };
}

Definitions of custom types look very similar to the one we saw in the previous section. The only two differences are the use of templates with the base class as a parameter and the inclusion of the people-fwd.hxx file. The latter allows us to refer to the generated as well as XML Schema built-in types, e.g., xml_schema::string. Note that we could also use the type aliases for element and attribute types instead of the actual types, as shown in the following code fragment:

namespace people
{
  template <typename base>
  class person_impl: public base
  {
  public:
    person_impl (const typename base::name_type& name);
    ...
  };
}

The implementation of our class templates is placed into the people-custom.cxx file:

// people-custom.cxx

#include <ostream>

#include "people.hxx"

namespace people
{
  // person_impl
  //
  template <typename base>
  person_impl<base>::
  person_impl (const xml_schema::string& name)
      : base (name)
  {
  }

  template <typename base>
  person_impl<base>::
  person_impl (std::auto_ptr<xml_schema::string>& name)
      : base (name)
  {
  }

  template <typename base>
  person_impl<base>::
  person_impl (const xercesc::DOMElement& e,
               xml_schema::flags f,
               xml_schema::container* c)
      : base (e, f, c)
  {
  }

  template <typename base>
  person_impl<base>::
  person_impl (const person_impl& x,
               xml_schema::flags f,
               xml_schema::container* c)
      : base (x, f, c)
  {
  }

  template <typename base>
  person_impl<base>* person_impl<base>::
  _clone (xml_schema::flags f, xml_schema::container* c) const
  {
    return new person_impl (*this, f, c);
  }

  template <typename base>
  void person_impl<base>::
  print (std::ostream& os) const
  {
    os << this->name () << std::endl;
  }

  // Explicitly instantiate person_impl class template for person_base.
  //
  template class person_impl<person_base>;


  // superman_impl
  //
  template <typename base>
  superman_impl<base>::
  superman_impl (const xml_schema::string& name, bool can_fly)
      : base (name, can_fly)
  {
  }

  template <typename base>
  superman_impl<base>::
  superman_impl (std::auto_ptr<xml_schema::string>& name, bool can_fly)
      : base (name, can_fly)
  {
  }

  template <typename base>
  superman_impl<base>::
  superman_impl (const xercesc::DOMElement& e,
                 xml_schema::flags f,
                 xml_schema::container* c)
      : base (e, f, c)
  {
  }

  template <typename base>
  superman_impl<base>::
  superman_impl (const superman_impl& x,
                 xml_schema::flags f,
                 xml_schema::container* c)
      : base (x, f, c)
  {
  }

  template <typename base>
  superman_impl<base>* superman_impl<base>::
  _clone (xml_schema::flags f,
          xml_schema::container* c) const
  {
    return new superman_impl (*this, f, c);
  }

  template <typename base>
  void superman_impl<base>::
  print (std::ostream& os) const
  {
    if (this->can_fly ())
      os << "Flying superman ";
    else
      os << "Superman ";

    os << this->name () << std::endl;
  }

  // Explicitly instantiate superman_impl class template for superman_base.
  //
  template class superman_impl<superman_base>;


  // batman_impl
  //
  template <typename base>
  batman_impl<base>::
  batman_impl (const xml_schema::string& name,
               bool can_fly,
               unsigned int wing_span)
      : base (name, can_fly, wing_span)
  {
  }

  template <typename base>
  batman_impl<base>::
  batman_impl (std::auto_ptr<xml_schema::string>& name,
               bool can_fly,
               unsigned int wing_span)
      : base (name, can_fly, wing_span)
  {
  }

  template <typename base>
  batman_impl<base>::
  batman_impl (const xercesc::DOMElement& e,
               xml_schema::flags f,
               xml_schema::container* c)
      : base (e, f, c)
  {
  }

  template <typename base>
  batman_impl<base>::
  batman_impl (const batman_impl& x,
               xml_schema::flags f,
               xml_schema::container* c)
      : base (x, f, c)
  {
  }

  template <typename base>
  batman_impl<base>* batman_impl<base>::
  _clone (xml_schema::flags f,
          xml_schema::container* c) const
  {
    return new batman_impl (*this, f, c);
  }

  template <typename base>
  void batman_impl<base>::
  print (std::ostream& os) const
  {
    os << "Batman " << this->name () << " with " <<
      this->wing_span () << "m wing span" << std::endl;
  }

  // Explicitly instantiate batman_impl class template for batman_base.
  //
  template class batman_impl<batman_base>;
}

Again, the implementation should look familiar. The two differences compared to the previous section that are worth mentioning are explicit template instantiations and qualification of member functions with this->. The explicit template instantiations is a nice optimization that allows us to keep the implementation details in the source file (instead of putting them into the header) and prevent object code bloat that could result from instantiating our member functions in several translation units. This technique works well in our case because for each class template we know the only template argument it will ever be instantiated with — the generated base class.

Qualification of member functions (name, can_fly, wing_span) with this-> is necessary because they are declared in the base and do not have any arguments that depend on the template argument. For more information on this aspec of C++ templates see your favorite C++ book (e.g., "C++ Templates" by Vandevoorde and Josuttis).

The client code that uses our customizations is presented below:

#include <memory>   // std::auto_ptr
#include <iostream>

#include "people.hxx"

using std::cerr;
using std::endl;

int
main (int argc, char* argv[])
{
  using namespace people;

  std::auto_ptr<catalog> c (catalog_ (argv[1]));

  for (catalog::person_const_iterator i (c->person ().begin ());
       i != c->person ().end (); ++i)
  {
    i->print (cerr);
  }
}

To summarize, the customization technique presented in this section consists of the following steps:

  1. Write *-custom-fwd.hxx with forward decelarations of all your class templates.
  2. Request generation of the forward declaration file with the --generate-forward option.
  3. Use the --fwd-prologue option to include *-custom-fwd.hxx at the beginning of the generated forward declaration file.
  4. Write *-custom.hxx with definitions of all your class templates. Include the generated forward declaration file to gain access to the generated and XML Schema built-in types.
  5. Use the --hxx-prologue option to include *-custom.hxx at the beginning of the generated header file.
  6. Use the --custom-type and/or --custom-type-regex options to request type customizations.
  7. Write *-custom.cxx with implementations of all your class templates. Include the generated header file at the beginning. Use explicit template instantiation to instantiate each template with the corresponding base class.

Customizing the XML Schema built-in types

This section shows how to use custom types for the XML Schema built-in types. All code in this section is taken from the calendar example which can be found in the examples/cxx/tree/custom/ directory of the XSD distribution. The schema for this example looks as follows:

<!-- calendar.xsd -->
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:cal="http://www.codesynthesis.com/calendar"
            targetNamespace="http://www.codesynthesis.com/calendar">

  <xsd:complexType name="event">
    <xsd:simpleContent>
      <xsd:extension base="xsd:string">
        <xsd:attribute name="title" type="xsd:string" use="required"/>
        <xsd:attribute name="date" type="xsd:date" use="required"/>
      </xsd:extension>
    </xsd:simpleContent>
  </xsd:complexType>

  <xsd:complexType name="events">
    <xsd:sequence>
      <xsd:element name="event" type="cal:event" maxOccurs="unbounded"/>
    </xsd:sequence>
  </xsd:complexType>

  <xsd:element name="events" type="cal:events"/>

</xsd:schema>

In this example we would like to map the xsd:data built-in type to the boost::gregorian::date class from the Boost date_time library.

Normally, when you compile your schema, code for the XML Schema built-in types is generated inline in the resulting header file. In order to customize the built-in types we will need to generate this code into a separate header file (remember that we can only customize types from the current schema's target namespace). To achive this we will use the --generate-xml-schema option. This option instructs XSD to generate code for the XML Schema namespace into a separate header file. The fake schema file provided to the compiler does not have to exist and is only used to derive the name of the generated header file. For more information on this option see the XSD command line interface documentation (man pages). We will use the following command line to generate the header for the XML Schema namespace:

xsd cxx-tree --generate-xml-schema --custom-type date --hxx-epilogue '#include "xml-schema-custom.hxx"' xml-schema.xsd

This will result in the xml-schema.hxx file. We also used the --custom-type option to customize the xsd:date type and the --hxx-epilogue to include xml-schema-custom.hxx at the end of the generated xml-schema.hxx. The xml-schema-custom.hxx file is where we define our date class:

// xml-schema-custom.hxx

#include <boost/date_time/gregorian/gregorian.hpp> // boost::gregorian::date

namespace xml_schema
{
  class date: public simple_type,
              public boost::gregorian::date
  {
  public:
    date (const xercesc::DOMElement&, flags = 0, container* = 0);
    date (const xercesc::DOMAttr&, flags = 0, container* = 0);
    date (const std::string&,
          const xercesc::DOMElement*,
          flags = 0,
          container* = 0);

    date (const date&, flags = 0, container* = 0);

    virtual date*
    _clone (flags = 0, container* = 0) const;
  };
}

The date class inherits from both xml_schema::simple_type (all simple types should inherit from xml_schema::simple_type and complex types from xml_schema::type) and boost::gregorian::date. The implementation of the date class is placed into the xml-schema-custom.cxx file:

// xml-schema-custom.cxx

#include <xsd/cxx/xml/string.hxx> // xml::transcode

#include "xml-schema.hxx"

using namespace boost;
using namespace boost::gregorian;
namespace xml = xsd::cxx::xml;

namespace xml_schema
{
  date::
  date (const xercesc::DOMElement& e, flags f, container* c)
      : simple_type (e, f, c),
        gregorian::date (
          from_simple_string (
            xml::transcode<char> (e.getTextContent ())))
  {
  }

  date::
  date (const xercesc::DOMAttr& a, flags f, container* c)
      : simple_type (a, f, c),
        gregorian::date (
          from_simple_string (
            xml::transcode<char> (a.getValue ())))
  {
  }

  date::
  date (const std::string& s,
        const xercesc::DOMElement* e,
        flags f,
        container* c)
      : simple_type (s, e, f, c),
        gregorian::date (from_simple_string (s))
  {
  }

  date::
  date (const date& x, flags f, container* c)
      : simple_type (d, f, c),
        gregorian::date (d)
  {
  }

  date* date::
  _clone (flags f, container* c) const
  {
    return new date (*this, f, c);
  }
}

As in the previous sections, we include xml-schema.hxx, not xml-schema-custom.hxx. We also use the transcode function provided by the XSD runtime in order to convert element and attribute values from Xerces-C++ encoding (UTF-16) to the current code page.

We don't need to do anything special when compiling our schema except for using the --extern-xml-schema option to instruct XSD to include the previously generated xml-schema.hxx instaed of generating the XML Schema namespace inline:

xsd cxx-tree --extern-xml-schema xml-schema.xsd calendar.xsd

We use the same fake XML Schema file name (xml-schema.xsd) as an argument to the --extern-xml-schema option as we used to generate xml-schema.hxx.

The client code for this example is presented below:

// driver.cxx

#include <memory>   // std::auto_ptr
#include <iostream>

#include "calendar.hxx"

using std::cerr;
using std::endl;

int
main (int argc, char* argv[])
{
  using namespace calendar;

  std::auto_ptr<events> c (events_ (argv[1]));

  for (events::event_const_iterator i (c->event ().begin ());
       i != c->event ().end (); ++i)
  {
    cerr << i->date () << " " << i->title () << endl
         << *i << endl;
  }
}

In this example, the operator<< operator provided by the boost::gregorian::date class is used to print dates in the calendar.

The xsd:anyType type, which is mapped to xml_schema::type, is a base type for every generated and built-in type in the C++/Tree mapping. Because of this property it is often useful to customize this type in order to provide a common functionality to all types in an object model. One special requirement when customizing anyType is that you should always inherit your version from the default implementation. For an example on how to customize anyType refer to the comments example which can be found in the examples/cxx/tree/custom/ directory of the XSD distribution.

Additional examples

The following additional examples, found in the examples/cxx/tree/custom/ directory, show various applications of the type customization mechanism:

  • The wildcard example shows how to customize type's parsing constructor and serialization operator to handle the xsd:anyAttribute wildcard.
  • The comments example shows how to customize the anyType built-in type in order to retain XML comments in the object model.
  • The double example shows how to customize parsing and serialization code for the xsd:double XML Schema built-in type. It can be used as a guide on how to customize built-in XML Schema types that are mapped to fundamental C++ types.
Personal tools